| Warranty: | 1 Year |
|---|---|
| Type: | Glass Washing and Drying Machine |
| Certification: | CE |
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier Temper/laminating/print glass washing and cleaning Machine
Machine introduction
This machine is used to wash glass before printing, tempering, laminating, glazing etc. It can clean and dry the glass at one pass.
Machine specification
| Model Number | YD-HWB-2000 |
| Max.glasswidth(mm) | 2000 |
| Min.glass (mm) | 400×400 |
| Glass thickness(mm) | 3~25 (PLC control system) |
| Glass speed(m/min) | 1-12m/min |
| Compressed air Consumption(It/min) | 1 |
| Pressure(kg/cm2) | 8 |
| Working height (mm) | 900+-20mm |
| Power(kw) | 28KW (blower 22kw, not including water heater) |
| Water | Water: self-circulation, tap water |
| Outer dimension(mm) | 6000×2800×2450 |
| Weight(kg) | 3500 |
| Voltage/frequency | 380V,50HZ or as requirement |
| # | Introduction |
| 1 | Thick steel frame structure, aluminum support beam, permanent use with high efficiency |
| 2 | PLC + touch screen system control, with the washing glass thickness automatic adjustment. It has one key set thickness system. Easy to control. |
| 3 | The metal sheet in the contact part between the cleaning and water is made of stainless steel. Including the cover, water receiver pan, screws, water tanks. |
| 4 | All conveyor rubber roller is made by all-inclusive vulcanized rubber (Do not contact with acidic liquid). Diameter of the rollers is 80mm. |
| 5 | The washing and drying section height can be adjusted 300mm higher to facilitate washing and maintaining of machine. |
| 6 | The machine has pre-rinsing system and air system for the first step cleaning of glass. |
| 7 | The washing section has 6pcs brushes. |
| 8 | 3 pairs of air blade, with high pressure air from the top blower. The air will circuit inside the air box to get hot. No need air heater. |
| 9 | Will have 3pcs of water tanks. One for glass rinsing, one for first 2 pairs of brushes and 1 for last brushes. It use 2 sets of water pumps. The water tank for the last water pump has heater. |
| 10 | With converter for blower and transfer |
| 11 | With internal circulation fan to give high pressure hot air to dry glass. The fan is controlled by converter Updated design, with the top filter can be open. |
| 12 | Has lamp to check if the glass is cleaned well |
| 13 | Low-e glass washing function, when it wash low-e glass, the first 2 brushes will raise up |
| 14 | Water pipe fast connection function. Easy for pipe cleaning |
| 15 | High quality bearings |
| 16 | Blower top open/close function With thick noise absorbing tank, with low-voice when blow is working. |
| 16 | With stainless steel water filter |
Warranty & Services
Warranty: Warranty period of the whole machine: one year
Machine commissioning and training: Send engineers to set up and commissioning at buyer's factory.
Aftersales service:
Life time techical and parts support.
On port techcial training or problem solving when necessary
Delivery time
30 days after down payment
Factory and CE certifications:
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}